Cheese dyeing machine is widely used in textile industry, is mainly used for dyeing of a device, in order to guarantee the use effect of later, we in the process of using need regular maintenance, only after maintenance can let the flexibility of dyeing machine, the effect will be better to use. The following dyeing machine factory will explain the relevant maintenance matters for you:

Bobbin dyeing machine

(1) Install, use and maintain the machine in strict accordance with the requirements of the equipment factory. The fan must be installed firmly to prevent vibration from causing a series of problems. Compressed air quality must be good, air pressure is not less than 5kg/cm2, water content, oil content should be low. Electric box, computer cabinet must be waterproof, moistureproof, ventilation cooling good.

(2) Add lubricating oil to the bearings of the bobbin dyeing machine regularly to check whether the bearings are worn; Check whether the continuous flange parts of the machine are sealed well. Check each electrical component for normal operation and wiring abnormalities. The dust on the machine should be cleaned regularly. If the machine is not used for a long time, please turn off the main power switch and cover it with dust cloth.

(3) Check the main pump spindle seat of the bobbin dyeing machine to see if there is any leakage of grease. If there is no leakage, it can be used normally. If there is any leakage or water vapor entering, it needs to be dealt with timely.

(4) Carry out a detailed inspection of the internal parts of the bocone dyeing machine, not only the parts, but also the inspection of each circuit, to ensure that it is in a normal state, problems should be dealt with in a timely manner, to avoid the occurrence of faults in the use process.

(5) During the daily use of the bobbin dyeing machine, regular inspection should be carried out on the dyeing machine in a timely manner, and timely treatment should be given to parts of the faults. It runs parts, should be timely add lubricating oil, and the bearing, can get a good operation, to ensure the smoothness. It should be properly lubricated to ensure smooth operation. In the lot of triangular belt, should assure reasonable and tight, can assure speed moderate.

If you encounter problems, you should check and deal with them timely. When the yarn dyeing machine is working, it is not allowed to open the sealing cover at will. If any abnormality is found, it must be closed in time. Free sales and stock manufacturers tell you that the general need every six months, the start of the shutdown, a comprehensive inspection. In the maintenance of the bobbin dyeing machine, the basic work is regular inspection.