Fujian dyeing machine is mainly used for various kinds of high-grade natural fiber fabric and the blended knitted and maintenance in Tibetan pressure scouring, bleaching, dyeing, washing, such as processing, can also apply to other rayon, acrylic, washed, such as processing, can also apply to other rayon, acrylic, blended fabric dyeing and processing under the atmospheric pressure, is the ideal equipment of high grade fabric. So what do we pay attention to in our daily installation? The following dyeing machine manufacturer will explain to you:

Fujian dyeing machine

1. Determine the installation location of the steam dyeing machine, but before the installation of the dyeing machine, the space for equipment maintenance and operation can be reserved for the convenience of future operation and maintenance; When heating water to steam, do not rush to open the control valve, but also need to cover the cylinder head, to prevent boiling water overflow caused by scalding operators;

2. The dyeing machine should be installed on a relatively flat foundation, and then fixed with screws at the foot; At the same time, any part of the operator's body is not allowed to extend directly under the hanger during the dyeing process, so as to prevent the hanger from falling off during the working process and causing injury to the operator;

3. In the process of installing Fujian dyeing machine, the instrument can be used to check the levelness of the equipment. In the case of insufficient levelness, the installation can only be carried out accurately;

4. The three-phase four-wire power supply in the dyeing machine can be placed in the electrical box of the equipment;

5. For the whole installation process of steam dyeing machine, the equipment shall be grounded accordingly to ensure the safety of installation and use of equipment.

When the steam dyeing machine is in operation, the fabric is driven by frequency conversion and speed regulation to enter the nozzle from the front of the dyeing cylinder, and the dyeing liquid is pumped out by circulating pump. After heating by heat exchanger, the fabric is reciprocated from the nozzle through the guide tube to the left and right of the back tube, and circulates, so that the fabric can be evenly colored in the dyeing cylinder through rapid circulation processing.

The above is about fujian dyeing machine in the installation of the relevant introduction, want to know more about dyeing machine installation related issues, welcome to call our official website, we will explain in detail for you.