The newly developed shaping machine has achieved results in the field of shuttle weaving and knitfinishing. The new configuration makes the prominent HSMFS-6500 more economical to operate, more widely suitable for various processes, and more environmentally friendly and balanced. And more special schemes to cope with coating dyeing and high production value knitwear finishing process.

Intelligent tensioning machine for drying and high temperature curing, suitable for all kinds of fabrics for high temperature shaping or curing process.

Laser controlled needle width laser probe using high frequency scanning, fabric at high speed can also achieve minimum and safe needle.

Automatic control finishing rolling machine humanized operation, widely recognized design, roll surface materials and hardness of a variety of choices to meet the needs of fabric and technology. Pressure equalizing rollers are standard, and curved rollers are also available. The liquid tank can be selected as the smallest, standard or extra large capacity. The roller in the liquid tank can be equipped with drive.

Main technical parameters

Form: hot air circulation, single layer horizontal

Carriage: Right-handed (or left-handed)

Nominal width (mm) : 1800, 2000, 2200, 2400, 2600 (narrow range series)

2800, 3000, 3200, 3400, 3600 (Wide width series)

Amplitude modulation range (mm) : 700-1600 700-1800 700-2000 700-2200 700-2400

700-2600 700-2800 700-3000 700-3200 700-3400

Nominal speed: 100m/min (speed range: 5-100m/min)

Range of overfeeding rate: positive overfeeding 30%, negative overfeeding 10%

Oven temperature: 100-230℃

Heat sources: Carrier heat oil, gas (city gas, natural gas, water gas, LPG), electricity, high pressure steam

Hold cloth form: pincus clip

Fall cloth form: single pendulum or pendulum, roll double fall cloth or roll

Edge detection: high precision infrared edge detection

Guide form: oil-free steel guide

Number of baking sections: 4-10, each section is 3m long

Dimensions of the drying room :(1344+n×3000) mm+ (W+1816) mm×1737mm

Machine dimensions :(16115+n×3000) mm+ (W+2500) mm×2300mm

Installed power :(55+n×15) KW (excluding electric heating power)

The process flow of the tensioning machine:

Open width feeding → thread broadening → infrared alignment → rolling → round winding → underfeed → overfeed on top → overfeed on top → peeling side → infrared detection side → upper needle edge → pulping side → stretching or hot setting → cold air cooling → cutting side and suction side → stripping → tilting off cloth or small beating