The operation and control of falling-out link is an important task in the operation of Fujian drawing-setting machine. First of all, before the operation of cloth dropping, we need to make relevant preparations. Do you know what the preparation involves? Let's take a look at the specific content below, I hope to help you!

Fujian tension setting machine

1. We need to clean the surface and working table of the tensioning machine equipment first, especially the cloth falling frame and the back part of the machine. Then you need to clean up the work site to make sure you avoid and clean the area around the equipment. We need to pay attention to check whether the back part of the equipment is normal, and check whether the auxiliary facilities such as the cloth stacking truck are complete and in good condition, whether the setting of the guide cloth through cloth route is reasonable, whether it can meet the work requirements, etc.

2. After checking and confirming that there is no abnormal problem, it is necessary to understand the relevant information and requirements in advance, so as to master the process and quality requirements of the cloth to be processed, which also provides convenience for the operation of the stretching and setting machine in the later stage. At the same time, the guide cart should be placed in a suitable position, generally under the cloth rack, and be ready for the empty cart, so as to receive and release the processed cloth.

3. We should select the suitable empty roll rack according to the specific properties of the fabric to be processed and the production requirements. After that, the position layout should be adjusted properly, so as to ensure that the coiling roller and the coiling roller are parallel. Then the staff can open the pull-up machine at the same time to start the shaping operation.

4. In the process of the modification of the tensioning machine, if the whole width of the machine needs to be adjusted, the transmission part of the machine should be rotated first to check whether it is normal. Under normal circumstances, then adjust the full width to the desired width, use the edge tracker to adjust, and adjust the feed to a predetermined value.

5. It should be noted that, in order to ensure the good operation of the pull rod, workers need to lubricate and maintain the width adjusting device regularly, and carefully check whether the transmission system of the door width adjusting device is normal. Normally the width control system should be tested and adjusted within one month, or adjusted appropriately.

In addition to the above preparatory work, Fujian tensioning machine operation also needs to focus on processing. Roll damage should be avoided when the lead cloth is fed on the traction mill, two-high mill and feed rack. Safety measures should also be taken to prevent operators from falling when the lead cloth crosses the front rack.

The above is about fujian before the operation of the framing machine preparation, want to know more about the framing machine price related issues, welcome to inquire about our official website, we will explain in detail for you.