When we were in the use of fujian dyeing machine, also is to pay attention to when choose dye, is a big hand, we actually is also should as far as possible to select invasive and uniformity of the material, in this way, when for Mosaic, it will be more reliable, it is because of this, we are in use, actually also is can to a large extent can better play to the advantages of it in all aspects. The following fujian dyeing machine factory will explain the use details for you:

Fujian dyeing machine

1. When using high temperature overflow dyeing machine, in order to avoid for process reasons caused by the improper operation, to avoid the cause of flower color, color stains, as well as its splash some phenomena, because, when high temperature high pressure dyeing machine, when to use these failures on its up to the quality of printing and dyeing family, also can cause some impact.

2. Fujian dyeing machine at the time of working, we actually is also should put it in a series of reductive cleaning, however, in terms of the process, also is actually lead to the raw material of colour and lustre degree is also affected by some, on the way, this is actually a more normal phenomenon, in view of this, we also do not need to worry too much about.

3. The use of high temperature overflow dyeing machine in the actual production, we should pay attention to when we use its tar, must avoid spots on it.

Said the reason, in fact that is because, this will lead to form a relatively thick in the middle of the oil material, when high temperature high pressure dyeing machine in such a situation, will be directly from the fiber is making its way into some of the fiber, that is, its for processing using high temperature high pressure dyeing machine, actually is also will have certain influence, so, requires that we should be timely clean.

4. Pay special attention to the safe operation of Fujian dyeing machine: for example, the observation window of tempered glass installed on the machine should never be swabbed with wet cloth when the dyeing temperature in the machine exceeds 100℃, because the glass is subjected to the effect of high/low temperature difference, which causes intense heat expansion and cold contraction and thus cracks, which is very dangerous. In addition, the globe valves at the upper/lower ends of the water level glass tube should be closed when the bath ratio is adjusted.